These high quality ABS plastic eyebrows give that true import performance look to your vehicle. 100% ABS Plastic Simple installation, no drilling, bolts right on Paintable

Polished, rustproof stainless steel visor. Curved to mount easily on 7" or 9" diam. headlight under rim. Ruby-red glass ornament "glows" with the refracted light from headlight. Beautiful and reminds you when headlight has been left on.

Chrome eagle on the back of mirror "Live to Ride, Ride to Live" motto, eagle and "Ride Free" inscription Nonglare, filtered flat mirror hoursing is 5-1/8" x 3-5/8" Mirror head can be slid up or down the chrome plated 3/8", 7-1/2" long steel stem Secure mirror to stem with screw using Allen wrench (included) For Honda, Kawasaki, Suzuki and Yamaha cycles Sold in pairs.

Dries ultra-hard, works on all metals Completely sandable, can be used as a filler Impervious to gasoline, grease, oil, battery acid and anti-freeze. Apply with brush or spray right over rust to stop further corrosion and completely seal all metals. Dries to a super-hard finish in 4 to 6 hours. So strong it can even be used with fiberglass or poly matting to seal gas tanks! Ultraviolet-sensitive—must be second-coated with any other paint to protect finish from sunlight.

Chromed-plated, custom-style steel pads feature black "O" rings for added styling and sure-footed starts Choose round or wide pedal For Harley-Davidson® cycles "O" ring section is approx. 4"L with raised ridge on end. Replace original pedals using original mounting hardware. Round Pedal: Approx. 1-1/2" diam. Wide Pedal: Approx. 2-1/4"W at mounting point. Swivel-type mount.

Perfect replacement for all worn screw-in shifter pegs Approx. 2"L x 1" diam. with 1/2"L screw-in stud For Harley-Davidson® models Chrome-plated peg with black "O" rings.

Shortens shifter travel by 40% Easy to install. Kit includes housing and special ball spacer. Made from Hi-Tech Plastic.

Magnetic or permanent mount Flashes 60 times per minute, in all directions Waterproof Lexan® dome resists weather and temperature extremes Rubber base seals tight, absorbs vibration Light's circuitry uses advanced computer-grade components for dependable, long life. Reverse polarity and shut-off protection. Easy-replace tube lasts up to 1,000 hours, replacement available. Mounts securely on top of vehicle, plugs into cigarette lighter. 4-1/2"H, 5" diam. base. Coil power cord included. 12-24 volt, 1/2-amp. Current draw. Magnet-mount light includes 12-ft. coil cord and plugs into cigarette lighter. Permanent-mount light hardwires into electrical system. Lens colors available: red, amber, blue, clear.

Make strong solder-less connections quickly Exceeds UL or SAE safety standards Our biggest terminal center—for automotive, marine, home, electronic. All terminals except high-temperature and female disconnects are pure copper with electro-tin plating. High-temperature terminals are nickel-plated steel to withstand extreme heat. Female disconnects are brass. Kit includes both insulated and non-insulated terminals. Insulated types eliminate taping and are color coded for quick identification of wire size. Included pieces: 435 Ring terminals. For permanent connections. Non-insulated terminals for 22-18 gauge wire (stud sizes #4, 6, 8, 10 and 1/4") and 16-14 gauge wire (sizes #4, 6, 8, 10 and 1/4" and 5/16"). Insulated terminals for 22-18 and 16-14 gauge wire (sizes #6, 8, 10) and 12-10 gauge wire (size #10). Also includes non-insulated high-temperature terminals for household use in places with excessive heat (up to 900 degrees F). For 16-14 gauge wire (#6, 8). 235 Spade terminals. For connection without removing screw or nut. Includes non-insulated and insulated terminals for 22-18 and 16-14 gauge wire (sizes #6, 8, 10) and insulated terminals for 12-10 gauge wire (size #10). 155 Disconnects. Plug-ins for fast connection and disconnection. With piggyback connectors. Includes non-insulated disconnects for 22-18 gauge wire (female with .110", .187" and .250" tab widths, male with .250" tab width) and 16-14 gauge wire (.187" and.250" female, .250" male). Insulated disconnects for 22-18 and 16-14 gauge wire (.187" and .250" female, .250" male). Twenty .250" adapters. Non-insulated. 3 types. Male tab adapters to adapt standard screws to male disconnects. Piggyback adapters split one wire into two. Fuse taps allow quick take-off from auto fuse blocks for adding accessories. 29 In-line butt connectors. Insulated. For joining wires without soldering or taping. Includes connectors for 22-18, 16-14, 12-10 gauge wire. 11 Bullets and receptacles, pigtails and line taps. Bullets and receptacles slice wires for fast connection and disconnection. For 16-14 gauge wire. Insulated. Closed-end pigtails permanently joining multiple wires. Nylon insulated cap ensures trouble-free, fully insulated dead-end splices. For 16-14 gauge wire. Quick-splice and taps take off an extra hot line quickly without stripping wires. Fast hook-up for auto radios, CBs, trailer lights. Also for house wiring. For 18-14 gauge wire. 15 Twist-on wire nuts. For 22-18, 20-16 and 22-14 gauge wire. 36 Cable ties. 3-1/2" long. 18 Grommets. Protect wire through metal panels. Sizes: 1/4" hole, 1/8" I.D., 5/16" hold, 3/16" I.D., 3/8" hold, 1/4" I.D. 40 Nylon cable clamps. Safely mount wires and wire bundles away from excessive heat and moving parts. Includes 1/8", 3/16", 1/4" and 1/2" diam. clamps. 6 Test clips. With mounting screw. Includes 1" and 2" lengths for 22-12 gauge wire. Organizer/storage box. Compartmentalized clear high-impact plastic box has hinged lid. Appro

Kit includes one radiator hose and 2 matching hose end caps (attached to hose) The end of ugly rubber hoses—hot finish/color brightens your under-hood area Shapes into any configuration to create a unique look and aids in cooling Withstands vibration. Corrosion-resistant 300 series stainless hose with 6061-T6 billet aluminum end caps.

Can be cut to any length The end of uggly rubber hoses—hot finish/color brightens your under-hood area! Shapes into any configuration to create a unique look and aids in cooling Withstands vibration. Corrosion-resistant 300series stainless steel hose. Order matching/contrasting 6061-T6 billet aluminum hose end caps for a complete look (sold separately; 20212G).

Rugged to absorb drag strip stress and strain! Front ends weigh less than stock and improve strip or street performance Lightweight for increased performance Designed to align perfectly with stock body. Headlight and grille areas may be cut out and made functional if desired for street use ( A indicates front end is already cut out and requires use of original grilles or screening to fill in). Original chrome accessories may also be used. Include hinge kit with mounting arms and brackets to allow entire front end to be tilted forward for easy access to engine (use of hinge kit prohibits use of front bumper). Gel-coat finished, needs sanding and priming before painting. Require hood hold-down pin set (not included). Not mailable. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by freight truck.

Black high-density foam covers assure a more comfortable grip and a no-slip grip for better control For left and right sides Fits all standard levers with up to 3/4" diam. ball ends Install with liquid detergent or vegetable oil (not included). Sold in pairs.

Black heavy-duty vinyl upholstery (with approximately 1/2" thick foam backing) withstands sun, weather and temperature extremes Replaces damaged upholstery quickly and easily Allows use of seat's original foam padding and pan Foam backing helps smooth out any minor deterioration of original foam cushion. For seats with more serious foam damage, order the seat foam repair kit (SKU# ZX022507P sold separately). Top stitching will resemble original-equipment-manufacturer styling and will vary depending on application. Custom fit only for cycles with original style seat. Not recommended for use with modified foam padding or seat.

1/8" thick black high-density ABS plastic molded to original specifications Custom-fit for left or right side For Honda, Suzuki and Yamaha models Can also be painted. Bolt on using existing hardware. Special moly fasteners also included.

1 Watt Luxeon® LED handheld spotlight 45 lumen bright white light 10 hours of burn time Powered by 4 alkaline AA batteries (included) Easy access battery compartment Lightweight, ergonomic design with cushioned rubber grip and wrist lanyard Buy 2 Get 1 FREE

1/2 DOORS

For air-cooled Volkswagen. Lets you remove, install flywheel gland nuts and axle nuts easily and without damage. Use with 1/2" breaker bar or ratchet. Chrome-vanadium steel.

Professional-quality 6-pt. socket provides countless other uses around garage, shop and home The best, easiest way to install or remove front-wheel-drive spindles Use with air or hand tools. 3"L. Years of dependable service—drop-forged, heat-treated chrome-vanadium steel with durable oxide finish.

Range: 10-150 ft.-lbs. and 1.4-20.7 m.-kgs. Approximately 18-1/2"L With hang-up hook. Wrench sets torque in clockwise movement. Reversible ratcheting action. Micrometer-style adjustments; lock holds torque setting. Nickel-chromed steel body?smooth ball-bearing action. Wrench clicks when you reach desired pre-set torque. With complete instructions and additional conversion tables and formulas.

Choice of Standard or Deep Well Sets Heavy-duty 6-pt. sockets for use with air-powered impact wrenches to speed installation and removal of nuts, bolts and studs 1/2" drive sockets Made of drop-forged and heat-treated chrome vanadium steel—the finest tool steel available Beveled nose for easy on and off. Holes for locking pin in drive tang. Black oxide finish. Sets include sockets and storage tray or box. Limited lifetime warranty.

Allows a 1/2-ton power pull with 10-ft. lift or a 1-ton power pull with 5-ft. lift Convertible quick-change feature allows double pulling power using 2 or 3 hooks Heavy-gauge steel is galvanized against rust and hardened at all stress points. Drop-forged hooks handle heavy loads; steel frame and ratchet guard. Trouble-free automatic thumb-control let-down release for maximum safety. Quick-change pulley. With 13 ft. of aircraft cable and heavy-duty, hardened frame bolts. Lightweight, easy to carry and store.

Small 2" x 2-1/2" x 1-1/2" module stores under seat Available with permanently attachable leads or alligator clips, 12-volts or 6-volts Chargers allow recharging or trickle charging without removing battery Plugs into any 110- to 120-volt outlet. 6-ft. quick connect/disconnect cable included. UL listed.

Chrome-vanadium steel Set includes sizes: T10, T15, T20, T25, T27 and T30 for use with 1/4" drive; T40, T45, T47, T50, T55 and T60 for use with 3/8" drive; 3/8" drive (F) x 1/4" drive (M) adapter. Black oxide finish. 2 storage rails included.

Features standard and metric calibrations. Range: 20-200 inch-lbs, 23-30 centimeters-kilograms Approximately 10-3/4"L Wrench sets torque in clockwise movement. Reversible ratcheting action. Micrometer-style adjustments; lock holds torque setting. Nickel-chromed steel body…smooth ball-bearing action. Wrench clicks when you reach desired pre-set torque. With complete instructions and additional conversion tables and formulas.

Holds 50-lbs. of sand or other abrasives Deliver abrasive at higher pressure than siphon-fed blasters to quickly remove rust, scale and carbon Approximately 14-1/2"W x 34"H x 21"D Cost-efficient professional sandblasting at it's best! Ideal for body, paint and welding shops. Kits include approx. 9-1/2 ft. abrasive hose with lever-control shut-off valve attached to handle. 3/8" NPT air inlet. Minimum 3/8" ID air hose recommended. Air consumption at 60- to 125-psi: 6-25 cfm. Pkg. of 3 replacement ceramic nozzles (sizes 3/32", 7/64", 1/8" or 9/64") available separately. Cannot be shipped express.

Work where conventional wrenches or sockets can't. Drop-forged, chrome-plated hardened steel. Choose metric or SAE set.

Great way to save money by doing it yourself All the tools you'll need to repair dents and scratches Kit includes rubber sanding block, 6 sheets of rough sandpaper to remove loose paint and primer, 6 sheets of fine sandpaper to smooth surfaces, 3 different sizes of applicators to spread putty or plastic filler (not included), finishing hammer, dolly, dent puller with self-tapping sheet metal screw that doesn't need starter hole, 2-way file blade holder with one each flat and half-round shaper blades.

Precision-machined open and 12-pt. box ends are offset 15° to simplify work in tight areas Raised panel for extra strength Drop-forged, heat-treated carbon steel, chrome-plated to resist rust.

10,000-psi pump, 6" ram stroke and 18" extended/12" collapsed height 5", 10", 15" and 20" steel extension tubes Heavy-duty, portable system is perfect for repairing all dents and creases Straightens and aligns auto bodies and frames. One release valve controls raising and lowering. Use it for positioning, straightening or raising machinery, etc., in the shop. Cannot be returned for credit or refund—exchange only for defective merchandise. 78 lbs.

For 100-Watt quartz-halogen driving and fog light kits

Drop-forged, heat-treated alloy steel, chrome-plated, then polished for rust resistance. Choose metric or SAE set.

Be prepared for anything…anywhere you go! All components fit neatly in a compartmented carry case, storing easily in your trunk or back seat Travel with peace of mind at a very affordable price! Heavy-duty, tangleproof battery booster cables (200-amp clamps, 8 feet long). Pencil-type 100 psi tire gauge. 12-in-1 pocket tool (includes 3 pliers, knife blade, can opener, bottle opener, 2 screwdrivers, awl/hole punch, fish scaler/fish hook remover, ruler, nail file). 6"L steel slip-joint pliers with comfortable PVC-covered grips and chrome-plated head. 8"L adjustable wrench with PVC-covered grips and chrome-plated head. 2 screwdrivers: 1/4" x 4" flat and #2 x 4" Phillips, both with chrome-plated steel shafts. 9 chip-type fuses: 10 to 30 amps. 10 assorted bandages. Siphon hose pump. Flashlight (uses 2 D batteries, not included). Pair of cotton gloves. 80 cable ties includes sixty 4", fifteen 6", five 8". Molded plastic case is approximately 19-1/2"H x 2-3/4"H x 14"L. Weighs 7 lbs.

Brews many cups of delicious coffee in minutes Thermostat keeps coffee piping hot See-through reservoir makes it easy to brew just the right amount of coffee Drip-stop feature lets you remove the carafe during the brewing process Includes heavy-duty coffee maker, glass carafe, 3 filters and 4-ft. power cord. Uses standard filters. Approx. 7" x 5" x 10". Plugs into cigarette lighter socket—low 16-amp draw.

Make your own personal pizza or cook a favorite meal Dual heating elements cook from top and bottom Mini oven has high and low heat settings for cooking or warming food Don't make needless stops or take fuel wasting detours to convenience shops for food and munchies! This little oven plugs into your 12 volt cigarette lighter socket or 12 volt power source. Approximately 10-1/2" x 7-1/2" x 4-1/4". Includes 5 foot cord.

Built-in temperature control for consistent heating up to 300° F Cooks or warms food Generous one-quart capacity interior Don't make needless stops or take fuel-wasting detours to convenience shops for food and munchies. Prepare delicious, hot, tasty snacks as you go! Portable stove is insulated to keep your food hot while the outside remains cool even after you've unplugged it. Plugs into your 12-volt cigarette lighter socket or 12-volt power source. Heavy-duty ABS plastic outside case. It's even aluminum clad to simplify cleanups. Approximately 10" x 7" x 5-7/8". Weighs 2-3/5 lbs. Folding handles for easy carrying. Includes 5-1/2 foot cord. Less than 12-amp draw.

Great for wood, metal and plastics. Set includes 10 different files and rasps and 2 handles. Files and rasps can be used with or without the handles. Includes 7 files (8" half-round, 6" slim taper saw, 6" extra-slim taper, 8" rotary mower, 8" mill, 6" round mill, 10" flat mill), 3 rasps (8" round wood, 8" half-round wood, 8" 4-way shoe), 2 interchangeable wood handles and vinyl storage pouch. Files and rasps made of hardened and tempered high-quality steel.

Heat-treated, hardened high-carbon steel with black oxide finish 6, 8, 10 and 12mm triple-square bits quickly remove, install special CV joint cap screws on Volkswagen Beetle & Super Beetle with independent rear suspension. Also use for repairing disc brake calipers, cylinder heads, oil pump housings, etc., on other imported vehicles. Size indicates the fastener thread size.

Replace burned-out or broken back-up, dome, parking, courtesy, dash, tail/stop bulbs. Meet original-equipment specifications. NOTE: Bulb shape may differ from original.

Mounts in or under dash Kit includes chromed metal parts and under-dash mounting bracket Automatic pop-out

We sold thousands of this popular blanket last year Now it's been improved! It's got a timer, so it won't kill your battery! It keeps you warm and cozy when temperatures drop, but the timer automatically shuts off the heat after 30 or 45 minutes (you choose) to prevent battery drain…just in case you forget. Cotton/poly fleece blanket measures 42"W x 58"L and it comes with 7-ft. cord.

Reversible 1/2" drive wrenches loosen and tighten lug nuts in seconds—perfect for roadside emergencies! Delivers up to 250-ft./lbs. of torque—changing a tire has never been easier! Also great for shop jobs—rotating tires, inspecting brakes, removing bolts, etc. Plugs into cigarette lighter socket. Unique torque action allows 12-volt impact wrench to generate the torque and power of an air-powered wrench! Motor spins until it reaches maximum speed, then the internal clutch automatically engages and the nut is tightened/loosened. Industrial-grade plastic housing. Easy-grip handle with trigger switch. Weighs less than 5-lbs. Includes 13-ft. power cord with light plug, sockets to fit all sizes of lug nuts, molded plastic carrying case and instructions.

This item will hold your license plate and illuminate it with a 12-volt light Black enameled steel Holds all plates

Single-beam lamps designed for use with spotlight housing assembly (sold separately) Choose amber or clear lenses For Honda Shadows Fluted lens for a broad light pattern. Check local laws regarding legality of amber sealed beams. Uses screw-type connectors.

Swivels 90° to fit where other adapters can't. Replaceable 20-amp capacity fuse in tip protects against shorts.

Single beam lamps are designed to use with Spotlight Housing (sold separately, ZX064689) Come with fluted lens for a broad light pattern. Use screw type connectors. Check local laws regarding legality of colored sealed beams.

Single beam lamps are designed to use with Spotlight Housing (sold separately, ZX064689) Come with nonfluted lens for a narrow pattern. Use screw type connectors. Check local laws regarding legality of colored sealed beams.

16-gauge carbon steel seamless shell Order by outside diameter of your exhaust pipes

Heat-treated and hardened alloy steel with black oxide finish, 5/16" shank. Also includes 4 Phillips, 5 slotted and 4 hex bits.

Be prepared for anything…anywhere you go! All components fit neatly in a compartmented carry case, storing easily in your trunk or back seat Travel with peace of mind at a very affordable price! Multifunction lantern includes a flashlight, 9" light and red and yellow emergency flashers all in one. 12-volt 300 psi mini compressor with assorted nozzles. Heavy-duty, tangleproof battery booster cables (300-amp clamps, 8 feet long). 18-piece FDA-approved first aid kit includes bandages, gauze, alcohol and iodine prep pads, towelettes. Folding reflective triangle. 4-way chrome-plated lug wrench includes sizes 11/16", 3/4" (19mm), 13/16", 7/8". 8"L steel slip-joint pliers with comfortable PVC-covered grips and chrome-plated head. 8"L adjustable steel wrench with PVC-covered grips and chrome-plated head. 6-way screwdriver with bit sizes 1/4" flat x #2 Phillips, SD-15 x SD-20 star drive, 1/4" and 5/16" nut drivers. 9 chip-type fuses: 10 to 30 amps. Hose tape. 100 cable ties, 4" x 2.5mm each. Molded plastic case is approximately 19-1/2"W x 4-3/4"H x 14"L. Weighs 14 lbs.